Update

bin/x

@@ -0,0 +1,127 @@
+#!/usr/bin/env nu
+
+# default view: only main screen
+def "main d" [] {
+    let res = main | where name == $env.PRIMARY_SCREEN | get resolutions | get 0 | get 0
+    xrandr --output $env.PRIMARY_SCREEN --mode $res --primary --output $env.SECONDARY_SCREEN --off --output HDMI-0 --off
+}
+
+# bureau view: both screens side to side
+def "main b" [] {
+    let screens = main
+    let secondary_screen_connected = $screens | where name == $env.SECONDARY_SCREEN | get 0 | get connected
+
+    if not $secondary_screen_connected {
+        notify-send "Couldn't set screen" "Secondary screen disconnected"
+        return
+    }
+
+    let res = $screens | where name == $env.PRIMARY_SCREEN | get resolutions | get 0 | get 0
+    xrandr --output $env.PRIMARY_SCREEN --mode $res --primary --output $env.SECONDARY_SCREEN --mode 1920x1080 $env.SECONDARY_SCREEN_POSITION $env.PRIMARY_SCREEN --output HDMI-0 --off
+}
+
+
+# television view: only TV on (720p so that menus are readable)
+def "main t" [] {
+    let screens = main
+    let secondary_screen_connected = $screens | where name == "HDMI-0" | get 0 | get connected
+
+    if not $secondary_screen_connected {
+        notify-send "Couldn't set screen" "TV disconnected"
+        return
+    }
+
+    xrandr --output $env.PRIMARY_SCREEN --off --output $env.SECONDARY_SCREEN --off --output HDMI-0 --mode 1280x720 --primary
+}
+
+# stream view: only secondary screen
+def "main s" [] {
+    let screens = main
+    let secondary_screen_connected = $screens | where name == $env.SECONDARY_SCREEN | get 0 | get connected
+
+    if not $secondary_screen_connected {
+        notify-send "Couldn't set screen" "Secondary screen disconnected"
+        return
+    }
+
+    xrandr --output $env.SECONDARY_SCREEN --mode 1920x1080 --primary --output $env.PRIMARY_SCREEN --off
+}
+
+# laptop view: only secondary screen
+def "main l" [] {
+    let screens = main
+    let secondary_screen_connected = $screens | where name == $env.SECONDARY_SCREEN | get 0 | get connected
+
+    if not $secondary_screen_connected {
+        notify-send "Couldn't set screen" "Secondary screen disconnected"
+        return
+    }
+
+    xrandr --output $env.SECONDARY_SCREEN --mode 1920x1080 --primary --output $env.PRIMARY_SCREEN --off
+}
+
+def main [] {
+    mut output = []
+    mut current_screen = {
+        name: ""
+        connected: false
+        on: false
+        primary: false
+        resolution: null
+        position: null
+        resolutions: []
+    }
+
+    let lines = ^xrandr | lines
+    let length = $lines | length
+
+    # We skip the first line
+    for i in 1..<$length {
+
+        let line = $lines | get $i
+        let split = $line | split row -r '\s+'
+
+        # This will be true whether the screen is connected or not
+        if $line =~ "connected" {
+
+            if $current_screen.name != "" {
+                $output = ($output | append $current_screen)
+                $current_screen.resolutions = []
+                $current_screen.on = false
+                $current_screen.resolution = null
+                $current_screen.position = null
+            }
+
+            $current_screen.name = ($split | get 0)
+            $current_screen.connected = (($split | get 1) != "disconnected")
+            $current_screen.primary = (($split | get 2) == "primary")
+
+            let resolution = if $current_screen.primary {
+                ($split | get 3 | split column -c '+' | get column1 | get 0)
+            } else {
+                ($split | get 2 | split column -c '+' | get column1 | get 0)
+            }
+
+            if not ($resolution | str starts-with "(") {
+                $current_screen.on = true
+                $current_screen.resolution = $resolution
+
+                $current_screen.position = if $current_screen.primary {
+                    ($split | get 3 | split column -c '+' | each { "+" + $in.column2 + "+" + $in.column3 } | get 0)
+                } else {
+                    ($split | get 2 | split column -c '+' | each { "+" + $in.column2 + "+" + $in.column3 } | get 0)
+                }
+            }
+
+
+        } else {
+            $current_screen.resolutions = ($current_screen.resolutions | append ($split | get 1))
+        }
+    }
+
+    if $current_screen.name != "" {
+        $output = ($output | append $current_screen)
+    }
+
+    $output
+}

config.nu

@@ -9,6 +9,5 @@ source ~/.config/nushell/config/update.nu
 source ~/.config/nushell/config/gclone.nu
 source ~/.config/nushell/config/pass.nu
 source ~/.config/nushell/config/docker.nu
-source ~/.config/nushell/config/xrandr.nu
 source ~/.config/nushell/config/tfetch.nu
 

config/aliases.nu

@@ -9,7 +9,7 @@ def tildize [] {
 
 # remove extension shortcut
 def rm-ext [] {
-    $in | path parse | udpate extension "" | get parent stem | str join "/"
+    $in | path parse | update extension "" | get parent stem | str join "/"
 }
 
 # ls builtin
@@ -33,22 +33,22 @@ def _ls_format_mode [mode: string] {
 }
 
 # quick and easy ls
-def ls [dir?: string] {
-    let output = _ls (if $dir == null { "" } else { $dir }) | sort-by type name -i
+def ls [dir?] {
+    let output = (if $dir == null { _ls } else { _ls $dir }) | sort-by type name -i
     if ($output | length) == 0 { "" | cat } else { $output | grid -c -s "  " | cat }
 }
 
 # ls with hidden files
-def la [dir?: string] {
-    _ls -al (if $dir == null { "" } else { $dir })
+def la [dir?] {
+    (if $dir == null { _ls -al  } else { _ls -al $dir })
         | sort-by type name -i
         | each { $in | update mode (_ls_format_mode $in.mode) }
         | select mode name target user size modified
 }
 
 # ls with details
-def ll [dir?: string] {
-    _ls -l (if $dir == null { "" } else { $dir })
+def ll [dir?] {
+    (if $dir == null { _ls -l } else { _ls -l })
         | each { $in | update mode (_ls_format_mode $in.mode) }
         | sort-by type name -i
         | select mode name target user size modified
@@ -60,7 +60,7 @@ alias _du = du
 # non recursive du
 def du [...args] {
     let parsed_args = if ($args | is-empty) { ["*"] } else { $args }
-    $parsed_args | each { _du -a $in | select path apparent physical } | flatten
+    $parsed_args | each { _du $in | select path apparent physical } | flatten
 }
 
 # df
@@ -75,7 +75,7 @@ def df [] {
 # easy markdown formamtter
 def to-md [] {
     let arg = $in
-    $env.config.table.mode = markdown;
+    $env.config.table.mode = "markdown";
     echo $arg
 }
 
@@ -99,7 +99,7 @@ def pdf [arg: string] {
 alias rg = rg -uu
 
 # mkdir && cd
-def --env mkcd [dir: string] { mkdir $dir; cd $dir }
+def --env mkcd [dir: string] { ^mkdir $dir; chmod 755 $dir; cd $dir }
 
 # run command in background
 alias pa = pueue add --immediate
@@ -135,3 +135,34 @@ def pst [] {
         }
         | select status command path start end
 }
+
+# shortcut for yazi
+def --env y [] {
+    let cwd_file = mktemp -t
+    yazi --cwd-file $cwd_file
+    cd (cat $cwd_file)
+}
+
+# Show cheatsheet
+def cheat [] {
+    pueue add -e evince ($env.HOME + '/git/gitea.tforgione.fr/tforgione/cheat/build/main.pdf')
+}
+
+# meme completion
+def _meme [] {
+    _ls ($env.HOME + '/Videos/Memes') | get name | each { rm-ext } | each { path basename }
+    }
+
+# Play a funny meme
+def m [arg: string@_meme] {
+    let previous_volume = (pactl get-sink-volume 0 | split row ' '  | filter { $in != "" } | get 4)
+    # pactl set-sink-volume 0 100%
+    mpv (glob ($env.HOME + '/Videos/Memes/' + $arg + '.*') | get 0)
+    # pactl set-sink-volume 0 $previous_volume
+}
+
+# mkdir with correct rights
+def mkdir [arg: string] {
+    ^mkdir $arg
+    chmod 755 $arg
+}

config/config.nu

@@ -8,9 +8,8 @@ $env.config.keybindings = (echo $env.config.keybindings | append {
 })
 
 $env.config.show_banner = false
-$env.config.use_grid_icons = false
-$env.config.cursor_shape.emacs = block
+$env.config.cursor_shape.emacs = "block"
 $env.config.history.max_size = 1_000_000_000_000_000
 $env.config.history.file_format = "sqlite"
 $env.config.history.isolation = true
-$env.config.filesize.metric = false
+$env.config.filesize.unit = "metric"

config/docker.nu

@@ -59,13 +59,16 @@ alias kns = k9s -n all
 alias pi = ssh pi -t "cd docker && /home/pi/.local/bin/lazydocker"
 
 # shortcut for lazydocker on phoenix's prod
-alias mnemosyne = ssh phoenix -t "cd prod && /home/polymny/.local/bin/lazydocker"
+alias phoenix = ssh phoenix -t "cd prod && /home/polymny/.local/bin/lazydocker"
 
 # shortcut for lazydocker on phoenix's infra
-alias infra = ssh phoenix -t "cd infra && /home/polymny/.local/bin/lazydocker"
+alias phoenix-infra = ssh phoenix -t "cd infra && /home/polymny/.local/bin/lazydocker"
 
-# shortcut for kns zeus's kubernetes cluster
-alias zeus = k9s -n all --kubeconfig ($env.HOME + '/.kubes/zeus/config')
+# shortcut for lazydocker on rhea's prod
+alias rhea = ssh rhea -t "cd prod && /home/polymny/.local/bin/lazydocker"
+
+# shortcut for lazydocker on phoenix's prod
+alias rhea-infra = ssh rhea -t "cd infra && /home/polymny/.local/bin/lazydocker"
 
 # shortcut for kns safir's kubernetes cluster
 alias safir = k9s -n all --kubeconfig ($env.HOME + '/.kubes/safir/config')

config/gclone.nu

@@ -1,21 +1,13 @@
 # gclone aliases
 
 def _gclone_dirs [] {
-    _ls ($env.GCLONE_PATH + "/*")
-        | append (_ls ($env.GCLONE_PATH + "/*/*"))
-        | append (_ls ($env.GCLONE_PATH + "/*/*/*"))
-        | each { $in.name | path basename }
-        | sort
-        | uniq
+    glob ($env.GCLONE_PATH + "/**") -d 3 | each { $in | path basename } | sort | uniq
 }
 
 # cd to a git directory
 def --env cdg [key: string@_gclone_dirs] {
-    let dir = _ls ($env.GCLONE_PATH + "/*")
-        | append (_ls ($env.GCLONE_PATH + "/*/*"))
-        | append (_ls ($env.GCLONE_PATH + "/*/*/*"))
-        | where { $in != null and ($in.name | path basename) == $key }
-
+    let dir = glob ($env.GCLONE_PATH + "/**") -d 3
+        | where { $in != null and ($in | path basename) == $key }
 
     match ($dir | length) {
         0 => {
@@ -28,7 +20,7 @@ def --env cdg [key: string@_gclone_dirs] {
         }
 
         1 => {
-            cd $dir.0.name
+            cd $dir.0
         }
 
         _ => {
@@ -66,7 +58,7 @@ def --env cdg [key: string@_gclone_dirs] {
                 return
             }
 
-            cd ($dir | get $choice | get name)
+            cd ($dir | get $choice)
         }
     }
 }

config/init.nu

@@ -1,757 +1,18 @@
-# Nushell Config File
+# config.nu
 #
-# version = "0.86.0"
-
-# For more information on defining custom themes, see
-# https://www.nushell.sh/book/coloring_and_theming.html
-# And here is the theme collection
-# https://github.com/nushell/nu_scripts/tree/main/themes
-let dark_theme = {
-    # color for nushell primitives
-    separator: white
-    leading_trailing_space_bg: { attr: n } # no fg, no bg, attr none effectively turns this off
-    header: green_bold
-    empty: blue
-    # Closures can be used to choose colors for specific values.
-    # The value (in this case, a bool) is piped into the closure.
-    # eg) {|| if $in { 'light_cyan' } else { 'light_gray' } }
-    bool: light_cyan
-    int: white
-    filesize: cyan
-    duration: white
-    date: purple
-    range: white
-    float: white
-    string: white
-    nothing: white
-    binary: white
-    cell-path: white
-    row_index: green_bold
-    record: white
-    list: white
-    block: white
-    hints: dark_gray
-    search_result: {bg: red fg: white}
-    shape_and: purple_bold
-    shape_binary: purple_bold
-    shape_block: blue_bold
-    shape_bool: light_cyan
-    shape_closure: green_bold
-    shape_custom: green
-    shape_datetime: cyan_bold
-    shape_directory: cyan
-    shape_external: cyan
-    shape_externalarg: green_bold
-    shape_filepath: cyan
-    shape_flag: blue_bold
-    shape_float: purple_bold
-    # shapes are used to change the cli syntax highlighting
-    shape_garbage: { fg: white bg: red attr: b}
-    shape_globpattern: cyan_bold
-    shape_int: purple_bold
-    shape_internalcall: cyan_bold
-    shape_list: cyan_bold
-    shape_literal: blue
-    shape_match_pattern: green
-    shape_matching_brackets: { attr: u }
-    shape_nothing: light_cyan
-    shape_operator: yellow
-    shape_or: purple_bold
-    shape_pipe: purple_bold
-    shape_range: yellow_bold
-    shape_record: cyan_bold
-    shape_redirection: purple_bold
-    shape_signature: green_bold
-    shape_string: green
-    shape_string_interpolation: cyan_bold
-    shape_table: blue_bold
-    shape_variable: purple
-    shape_vardecl: purple
-}
-
-let light_theme = {
-    # color for nushell primitives
-    separator: dark_gray
-    leading_trailing_space_bg: { attr: n } # no fg, no bg, attr none effectively turns this off
-    header: green_bold
-    empty: blue
-    # Closures can be used to choose colors for specific values.
-    # The value (in this case, a bool) is piped into the closure.
-    # eg) {|| if $in { 'dark_cyan' } else { 'dark_gray' } }
-    bool: dark_cyan
-    int: dark_gray
-    filesize: cyan_bold
-    duration: dark_gray
-    date: purple
-    range: dark_gray
-    float: dark_gray
-    string: dark_gray
-    nothing: dark_gray
-    binary: dark_gray
-    cell-path: dark_gray
-    row_index: green_bold
-    record: white
-    list: white
-    block: white
-    hints: dark_gray
-    search_result: {fg: white bg: red}
-    shape_and: purple_bold
-    shape_binary: purple_bold
-    shape_block: blue_bold
-    shape_bool: light_cyan
-    shape_closure: green_bold
-    shape_custom: green
-    shape_datetime: cyan_bold
-    shape_directory: cyan
-    shape_external: cyan
-    shape_externalarg: green_bold
-    shape_filepath: cyan
-    shape_flag: blue_bold
-    shape_float: purple_bold
-    # shapes are used to change the cli syntax highlighting
-    shape_garbage: { fg: white bg: red attr: b}
-    shape_globpattern: cyan_bold
-    shape_int: purple_bold
-    shape_internalcall: cyan_bold
-    shape_list: cyan_bold
-    shape_literal: blue
-    shape_match_pattern: green
-    shape_matching_brackets: { attr: u }
-    shape_nothing: light_cyan
-    shape_operator: yellow
-    shape_or: purple_bold
-    shape_pipe: purple_bold
-    shape_range: yellow_bold
-    shape_record: cyan_bold
-    shape_redirection: purple_bold
-    shape_signature: green_bold
-    shape_string: green
-    shape_string_interpolation: cyan_bold
-    shape_table: blue_bold
-    shape_variable: purple
-    shape_vardecl: purple
-}
-
-# External completer example
-# let carapace_completer = {|spans|
-#     carapace $spans.0 nushell $spans | from json
-# }
-
-# The default config record. This is where much of your global configuration is setup.
-$env.config = {
-    show_banner: true # true or false to enable or disable the welcome banner at startup
-
-    ls: {
-        use_ls_colors: true # use the LS_COLORS environment variable to colorize output
-        clickable_links: true # enable or disable clickable links. Your terminal has to support links.
-    }
-
-    rm: {
-        always_trash: false # always act as if -t was given. Can be overridden with -p
-    }
-
-    table: {
-        mode: rounded # basic, compact, compact_double, light, thin, with_love, rounded, reinforced, heavy, none, other
-        index_mode: always # "always" show indexes, "never" show indexes, "auto" = show indexes when a table has "index" column
-        show_empty: true # show 'empty list' and 'empty record' placeholders for command output
-        padding: { left: 1, right: 1 } # a left right padding of each column in a table
-        trim: {
-            methodology: wrapping # wrapping or truncating
-            wrapping_try_keep_words: true # A strategy used by the 'wrapping' methodology
-            truncating_suffix: "..." # A suffix used by the 'truncating' methodology
-        }
-        header_on_separator: false # show header text on separator/border line
-        # abbreviated_row_count: 10 # limit data rows from top and bottom after reaching a set point
-    }
-
-    error_style: "fancy" # "fancy" or "plain" for screen reader-friendly error messages
-
-    # datetime_format determines what a datetime rendered in the shell would look like.
-    # Behavior without this configuration point will be to "humanize" the datetime display,
-    # showing something like "a day ago."
-    datetime_format: {
-        # normal: '%a, %d %b %Y %H:%M:%S %z'    # shows up in displays of variables or other datetime's outside of tables
-        # table: '%m/%d/%y %I:%M:%S%p'          # generally shows up in tabular outputs such as ls. commenting this out will change it to the default human readable datetime format
-    }
-
-    explore: {
-        status_bar_background: {fg: "#1D1F21", bg: "#C4C9C6"},
-        command_bar_text: {fg: "#C4C9C6"},
-        highlight: {fg: "black", bg: "yellow"},
-        status: {
-            error: {fg: "white", bg: "red"},
-            warn: {}
-            info: {}
-        },
-        table: {
-            split_line: {fg: "#404040"},
-            selected_cell: {bg: light_blue},
-            selected_row: {},
-            selected_column: {},
-        },
-    }
-
-    history: {
-        max_size: 100_000 # Session has to be reloaded for this to take effect
-        sync_on_enter: true # Enable to share history between multiple sessions, else you have to close the session to write history to file
-        file_format: "plaintext" # "sqlite" or "plaintext"
-        isolation: false # only available with sqlite file_format. true enables history isolation, false disables it. true will allow the history to be isolated to the current session using up/down arrows. false will allow the history to be shared across all sessions.
-    }
-
-    completions: {
-        case_sensitive: false # set to true to enable case-sensitive completions
-        quick: true    # set this to false to prevent auto-selecting completions when only one remains
-        partial: true    # set this to false to prevent partial filling of the prompt
-        algorithm: "prefix"    # prefix or fuzzy
-        external: {
-            enable: true # set to false to prevent nushell looking into $env.PATH to find more suggestions, `false` recommended for WSL users as this look up may be very slow
-            max_results: 100 # setting it lower can improve completion performance at the cost of omitting some options
-            completer: null # check 'carapace_completer' above as an example
-        }
-    }
-
-    filesize: {
-        metric: true # true => KB, MB, GB (ISO standard), false => KiB, MiB, GiB (Windows standard)
-        format: "auto" # b, kb, kib, mb, mib, gb, gib, tb, tib, pb, pib, eb, eib, auto
-    }
-
-    cursor_shape: {
-        emacs: line # block, underscore, line, blink_block, blink_underscore, blink_line, inherit to skip setting cursor shape (line is the default)
-        vi_insert: block # block, underscore, line, blink_block, blink_underscore, blink_line, inherit to skip setting cursor shape (block is the default)
-        vi_normal: underscore # block, underscore, line, blink_block, blink_underscore, blink_line, inherit to skip setting cursor shape (underscore is the default)
-    }
-
-    color_config: $dark_theme # if you want a more interesting theme, you can replace the empty record with `$dark_theme`, `$light_theme` or another custom record
-    use_grid_icons: true
-    footer_mode: "25" # always, never, number_of_rows, auto
-    float_precision: 2 # the precision for displaying floats in tables
-    buffer_editor: "" # command that will be used to edit the current line buffer with ctrl+o, if unset fallback to $env.EDITOR and $env.VISUAL
-    use_ansi_coloring: true
-    bracketed_paste: true # enable bracketed paste, currently useless on windows
-    edit_mode: emacs # emacs, vi
-    shell_integration: false # enables terminal shell integration. Off by default, as some terminals have issues with this.
-    render_right_prompt_on_last_line: false # true or false to enable or disable right prompt to be rendered on last line of the prompt.
-    use_kitty_protocol: false # enables keyboard enhancement protocol implemented by kitty console, only if your terminal support this
-
-    hooks: {
-        pre_prompt: [{ null }] # run before the prompt is shown
-        pre_execution: [{ null }] # run before the repl input is run
-        env_change: {
-            PWD: [{|before, after| null }] # run if the PWD environment is different since the last repl input
-        }
-        display_output: "if (term size).columns >= 100 { table -e } else { table }" # run to display the output of a pipeline
-        command_not_found: { null } # return an error message when a command is not found
-    }
-
-    menus: [
-        # Configuration for default nushell menus
-        # Note the lack of source parameter
-        {
-            name: completion_menu
-            only_buffer_difference: false
-            marker: "| "
-            type: {
-                layout: columnar
-                columns: 4
-                col_width: 20     # Optional value. If missing all the screen width is used to calculate column width
-                col_padding: 2
-            }
-            style: {
-                text: green
-                selected_text: green_reverse
-                description_text: yellow
-            }
-        }
-        {
-            name: history_menu
-            only_buffer_difference: true
-            marker: "? "
-            type: {
-                layout: list
-                page_size: 10
-            }
-            style: {
-                text: green
-                selected_text: green_reverse
-                description_text: yellow
-            }
-        }
-        {
-            name: help_menu
-            only_buffer_difference: true
-            marker: "? "
-            type: {
-                layout: description
-                columns: 4
-                col_width: 20     # Optional value. If missing all the screen width is used to calculate column width
-                col_padding: 2
-                selection_rows: 4
-                description_rows: 10
-            }
-            style: {
-                text: green
-                selected_text: green_reverse
-                description_text: yellow
-            }
-        }
-    ]
-
-    keybindings: [
-        {
-            name: completion_menu
-            modifier: none
-            keycode: tab
-            mode: [emacs vi_normal vi_insert]
-            event: {
-                until: [
-                    { send: menu name: completion_menu }
-                    { send: menunext }
-                    { edit: complete }
-                ]
-            }
-        }
-        {
-            name: history_menu
-            modifier: control
-            keycode: char_r
-            mode: [emacs, vi_insert, vi_normal]
-            event: { send: menu name: history_menu }
-        }
-        {
-            name: help_menu
-            modifier: none
-            keycode: f1
-            mode: [emacs, vi_insert, vi_normal]
-            event: { send: menu name: help_menu }
-        }
-        {
-            name: completion_previous_menu
-            modifier: shift
-            keycode: backtab
-            mode: [emacs, vi_normal, vi_insert]
-            event: { send: menuprevious }
-        }
-        {
-            name: next_page_menu
-            modifier: control
-            keycode: char_x
-            mode: emacs
-            event: { send: menupagenext }
-        }
-        {
-            name: undo_or_previous_page_menu
-            modifier: control
-            keycode: char_z
-            mode: emacs
-            event: {
-                until: [
-                    { send: menupageprevious }
-                    { edit: undo }
-                ]
-            }
-        }
-        {
-            name: escape
-            modifier: none
-            keycode: escape
-            mode: [emacs, vi_normal, vi_insert]
-            event: { send: esc }    # NOTE: does not appear to work
-        }
-        {
-            name: cancel_command
-            modifier: control
-            keycode: char_c
-            mode: [emacs, vi_normal, vi_insert]
-            event: { send: ctrlc }
-        }
-        {
-            name: quit_shell
-            modifier: control
-            keycode: char_d
-            mode: [emacs, vi_normal, vi_insert]
-            event: { send: ctrld }
-        }
-        {
-            name: clear_screen
-            modifier: control
-            keycode: char_l
-            mode: [emacs, vi_normal, vi_insert]
-            event: { send: clearscreen }
-        }
-        {
-            name: search_history
-            modifier: control
-            keycode: char_q
-            mode: [emacs, vi_normal, vi_insert]
-            event: { send: searchhistory }
-        }
-        {
-            name: open_command_editor
-            modifier: control
-            keycode: char_o
-            mode: [emacs, vi_normal, vi_insert]
-            event: { send: openeditor }
-        }
-        {
-            name: move_up
-            modifier: none
-            keycode: up
-            mode: [emacs, vi_normal, vi_insert]
-            event: {
-                until: [
-                    {send: menuup}
-                    {send: up}
-                ]
-            }
-        }
-        {
-            name: move_down
-            modifier: none
-            keycode: down
-            mode: [emacs, vi_normal, vi_insert]
-            event: {
-                until: [
-                    {send: menudown}
-                    {send: down}
-                ]
-            }
-        }
-        {
-            name: move_left
-            modifier: none
-            keycode: left
-            mode: [emacs, vi_normal, vi_insert]
-            event: {
-                until: [
-                    {send: menuleft}
-                    {send: left}
-                ]
-            }
-        }
-        {
-            name: move_right_or_take_history_hint
-            modifier: none
-            keycode: right
-            mode: [emacs, vi_normal, vi_insert]
-            event: {
-                until: [
-                    {send: historyhintcomplete}
-                    {send: menuright}
-                    {send: right}
-                ]
-            }
-        }
-        {
-            name: move_one_word_left
-            modifier: control
-            keycode: left
-            mode: [emacs, vi_normal, vi_insert]
-            event: {edit: movewordleft}
-        }
-        {
-            name: move_one_word_right_or_take_history_hint
-            modifier: control
-            keycode: right
-            mode: [emacs, vi_normal, vi_insert]
-            event: {
-                until: [
-                    {send: historyhintwordcomplete}
-                    {edit: movewordright}
-                ]
-            }
-        }
-        {
-            name: move_to_line_start
-            modifier: none
-            keycode: home
-            mode: [emacs, vi_normal, vi_insert]
-            event: {edit: movetolinestart}
-        }
-        {
-            name: move_to_line_start
-            modifier: control
-            keycode: char_a
-            mode: [emacs, vi_normal, vi_insert]
-            event: {edit: movetolinestart}
-        }
-        {
-            name: move_to_line_end_or_take_history_hint
-            modifier: none
-            keycode: end
-            mode: [emacs, vi_normal, vi_insert]
-            event: {
-                until: [
-                    {send: historyhintcomplete}
-                    {edit: movetolineend}
-                ]
-            }
-        }
-        {
-            name: move_to_line_end_or_take_history_hint
-            modifier: control
-            keycode: char_e
-            mode: [emacs, vi_normal, vi_insert]
-            event: {
-                until: [
-                    {send: historyhintcomplete}
-                    {edit: movetolineend}
-                ]
-            }
-        }
-        {
-            name: move_to_line_start
-            modifier: control
-            keycode: home
-            mode: [emacs, vi_normal, vi_insert]
-            event: {edit: movetolinestart}
-        }
-        {
-            name: move_to_line_end
-            modifier: control
-            keycode: end
-            mode: [emacs, vi_normal, vi_insert]
-            event: {edit: movetolineend}
-        }
-        {
-            name: move_up
-            modifier: control
-            keycode: char_p
-            mode: [emacs, vi_normal, vi_insert]
-            event: {
-                until: [
-                    {send: menuup}
-                    {send: up}
-                ]
-            }
-        }
-        {
-            name: move_down
-            modifier: control
-            keycode: char_t
-            mode: [emacs, vi_normal, vi_insert]
-            event: {
-                until: [
-                    {send: menudown}
-                    {send: down}
-                ]
-            }
-        }
-        {
-            name: delete_one_character_backward
-            modifier: none
-            keycode: backspace
-            mode: [emacs, vi_insert]
-            event: {edit: backspace}
-        }
-        {
-            name: delete_one_word_backward
-            modifier: control
-            keycode: backspace
-            mode: [emacs, vi_insert]
-            event: {edit: backspaceword}
-        }
-        {
-            name: delete_one_character_forward
-            modifier: none
-            keycode: delete
-            mode: [emacs, vi_insert]
-            event: {edit: delete}
-        }
-        {
-            name: delete_one_character_forward
-            modifier: control
-            keycode: delete
-            mode: [emacs, vi_insert]
-            event: {edit: delete}
-        }
-        {
-            name: delete_one_character_forward
-            modifier: control
-            keycode: char_h
-            mode: [emacs, vi_insert]
-            event: {edit: backspace}
-        }
-        {
-            name: delete_one_word_backward
-            modifier: control
-            keycode: char_w
-            mode: [emacs, vi_insert]
-            event: {edit: backspaceword}
-        }
-        {
-            name: move_left
-            modifier: none
-            keycode: backspace
-            mode: vi_normal
-            event: {edit: moveleft}
-        }
-        {
-            name: newline_or_run_command
-            modifier: none
-            keycode: enter
-            mode: emacs
-            event: {send: enter}
-        }
-        {
-            name: move_left
-            modifier: control
-            keycode: char_b
-            mode: emacs
-            event: {
-                until: [
-                    {send: menuleft}
-                    {send: left}
-                ]
-            }
-        }
-        {
-            name: move_right_or_take_history_hint
-            modifier: control
-            keycode: char_f
-            mode: emacs
-            event: {
-                until: [
-                    {send: historyhintcomplete}
-                    {send: menuright}
-                    {send: right}
-                ]
-            }
-        }
-        {
-            name: redo_change
-            modifier: control
-            keycode: char_g
-            mode: emacs
-            event: {edit: redo}
-        }
-        {
-            name: undo_change
-            modifier: control
-            keycode: char_z
-            mode: emacs
-            event: {edit: undo}
-        }
-        {
-            name: paste_before
-            modifier: control
-            keycode: char_y
-            mode: emacs
-            event: {edit: pastecutbufferbefore}
-        }
-        {
-            name: cut_word_left
-            modifier: control
-            keycode: char_w
-            mode: emacs
-            event: {edit: cutwordleft}
-        }
-        {
-            name: cut_line_to_end
-            modifier: control
-            keycode: char_k
-            mode: emacs
-            event: {edit: cuttoend}
-        }
-        {
-            name: cut_line_from_start
-            modifier: control
-            keycode: char_u
-            mode: emacs
-            event: {edit: cutfromstart}
-        }
-        {
-            name: swap_graphemes
-            modifier: control
-            keycode: char_t
-            mode: emacs
-            event: {edit: swapgraphemes}
-        }
-        {
-            name: move_one_word_left
-            modifier: alt
-            keycode: left
-            mode: emacs
-            event: {edit: movewordleft}
-        }
-        {
-            name: move_one_word_right_or_take_history_hint
-            modifier: alt
-            keycode: right
-            mode: emacs
-            event: {
-                until: [
-                    {send: historyhintwordcomplete}
-                    {edit: movewordright}
-                ]
-            }
-        }
-        {
-            name: move_one_word_left
-            modifier: alt
-            keycode: char_b
-            mode: emacs
-            event: {edit: movewordleft}
-        }
-        {
-            name: move_one_word_right_or_take_history_hint
-            modifier: alt
-            keycode: char_f
-            mode: emacs
-            event: {
-                until: [
-                    {send: historyhintwordcomplete}
-                    {edit: movewordright}
-                ]
-            }
-        }
-        {
-            name: delete_one_word_forward
-            modifier: alt
-            keycode: delete
-            mode: emacs
-            event: {edit: deleteword}
-        }
-        {
-            name: delete_one_word_backward
-            modifier: alt
-            keycode: backspace
-            mode: emacs
-            event: {edit: backspaceword}
-        }
-        {
-            name: delete_one_word_backward
-            modifier: alt
-            keycode: char_m
-            mode: emacs
-            event: {edit: backspaceword}
-        }
-        {
-            name: cut_word_to_right
-            modifier: alt
-            keycode: char_d
-            mode: emacs
-            event: {edit: cutwordright}
-        }
-        {
-            name: upper_case_word
-            modifier: alt
-            keycode: char_u
-            mode: emacs
-            event: {edit: uppercaseword}
-        }
-        {
-            name: lower_case_word
-            modifier: alt
-            keycode: char_l
-            mode: emacs
-            event: {edit: lowercaseword}
-        }
-        {
-            name: capitalize_char
-            modifier: alt
-            keycode: char_c
-            mode: emacs
-            event: {edit: capitalizechar}
-        }
-    ]
-}
+# Installed by:
+# version = "0.102.0"
+#
+# This file is used to override default Nushell settings, define
+# (or import) custom commands, or run any other startup tasks.
+# See https://www.nushell.sh/book/configuration.html
+#
+# This file is loaded after env.nu and before login.nu
+#
+# You can open this file in your default editor using:
+# config nu
+#
+# See `help config nu` for more options
+#
+# You can remove these comments if you want or leave
+# them for future reference.

config/mount.nu

@@ -55,7 +55,7 @@ def mount-disk [] {
 
     if ("SECONDARY_DISK_UUID" in $env) {
         $passphrase | sudo cryptsetup luksOpen ("/dev/disk/by-uuid/" + $env.SECONDARY_DISK_UUID) luks2
-        sudo mount /dev/mapper/luks2 /mnt
+        sudo mount /dev/mapper/luks2 /data
     }
 
     # Some services cannot be started on boot because my encrypted drives are

config/xrandr.nu

@@ -1,66 +0,0 @@
-# xrandr wrapper for nushell
-def xrandr [] {
-    mut output = []
-    mut current_screen = {
-        name: ""
-        connected: false
-        on: false
-        primary: false
-        resolution: null
-        position: null
-        resolutions: []
-    }
-
-    let lines = ^xrandr | lines
-    let length = $lines | length
-
-    # We skip the first line
-    for i in 1..<$length {
-
-        let line = $lines | get $i
-        let split = $line | split row -r '\s+'
-
-        # This will be true whether the screen is connected or not
-        if $line =~ "connected" {
-
-            if $current_screen.name != "" {
-                $output = ($output | append $current_screen)
-                $current_screen.resolutions = []
-                $current_screen.on = false
-                $current_screen.resolution = null
-                $current_screen.position = null
-            }
-
-            $current_screen.name = ($split | get 0)
-            $current_screen.connected = (($split | get 1) != "disconnected")
-            $current_screen.primary = (($split | get 2) == "primary")
-
-            let resolution = if $current_screen.primary {
-                ($split | get 3 | split column -c '+' | get column1 | get 0)
-            } else {
-                ($split | get 2 | split column -c '+' | get column1 | get 0)
-            }
-
-            if not ($resolution | str starts-with "(") {
-                $current_screen.on = true
-                $current_screen.resolution = $resolution
-
-                $current_screen.position = if $current_screen.primary {
-                    ($split | get 3 | split column -c '+' | each { "+" + $in.column2 + "+" + $in.column3 } | get 0)
-                } else {
-                    ($split | get 2 | split column -c '+' | each { "+" + $in.column2 + "+" + $in.column3 } | get 0)
-                }
-            }
-
-
-        } else {
-            $current_screen.resolutions = ($current_screen.resolutions | append ($split | get 1))
-        }
-    }
-
-    if $current_screen.name != "" {
-        $output = ($output | append $current_screen)
-    }
-
-    $output
-}

env.nu

@@ -46,7 +46,7 @@ def create_left_prompt [] {
 
     # Hostname
     let hostname_color = ansi green_bold
-    let hostname = (sys).host.hostname
+    let hostname = (sys host).hostname
 
     # Current director
     let dir_color = ansi blue_bold
@@ -83,7 +83,7 @@ def create_left_prompt [] {
         ""
     }
 
-    let sudo_compromised = if not (which ^sudo | get path.0) == "/usr/bin/sudo" {
+    let sudo_compromised = if not ((which sudo | get path.0) == "/usr/bin/sudo") {
         (ansi red_bold) + " ‹sudo compromised›" + (ansi reset)
     } else {
         ""
@@ -237,24 +237,21 @@ $env.LS_COLORS = ([
 ] | str join ":")
 
 # French by default
-$env.LANG = fr_FR.UTF-8
+$env.LANG = 'fr_FR.UTF-8'
 
 # Gnome Keyring Daemon
 $env.GNOME_KEYRING_DAEMON = '/run/user/1000/keyring'
 
 # Text file editor
-$env.EDITOR = nvim
+$env.EDITOR = 'nvim'
 
 # Backtrace for rust
-$env.RUST_BACKTRACE = full
+$env.RUST_BACKTRACE = 'full'
 
 # Gclone env
 $env.GCLONE_PATH = $env.HOME + '/git'
 $env.GCLONE_FORCE_SSH = true
 
-# Python virtual env
-$env.VIRTUAL_ENV = $env.HOME + '/.venv'
-
 # Don't put ugly go directory in my home
 $env.GOPATH = $env.HOME + '/.go'
 
@@ -262,10 +259,25 @@ $env.GOPATH = $env.HOME + '/.go'
 # $env.PATH = ($env.PATH | split row (char esep) | prepend '/some/path')
 $env.PATH = ($env.PATH
     | split row (char esep)
+    | prepend ('/opt/cuda/bin')
     | prepend ($env.HOME + '/.config/polymny/bin')
+    | prepend ($env.HOME + '/.config/nushell/bin')
     | prepend ($env.HOME + '/.config/dotfiles/bin')
     | prepend ($env.HOME + '/.config/dotfiles/bin-extra')
     | prepend ($env.HOME + '/.cargo/bin')
     | prepend ($env.HOME + '/.npmbin/bin')
     | prepend ($env.HOME + '/.venv/bin')
 )
+
+# Deep learning on GPU
+$env.XLA_FLAGS = '--xla_gpu_cuda_data_dir=/opt/cuda'
+
+# Python virtual env
+$env.VIRTUAL_ENV = $env.HOME + '/.venv'
+
+
+$env.XDG_SESSION_TYPE = if (tty | str starts-with "/dev/pts") {
+    "x11"
+} else {
+    "tty"
+}